Specifications

KVM Switch — Installation and Quick Start 5

How to Mount the KVM Switch

Mounting options

You can install the KVM Switch in the front or the rear of the rack or enclosure. To mount the KVM

Switch horizontally in a NetShelter

or any other standard EIA-310 rack or enclosure:

1. Attach the mounting brackets to the front or rear of the KVM Switch, using flat-head screws

(provided).

2. Insert caged nuts (provided with the rack) on the vertical mounting rails above a number at the

start of a U-space in your enclosure and below the same number at the lower end of the

U–space.

3. Align the mounting holes on the brackets with the caged nuts you installed in step 2, and insert

four mounting screws (provided with the rack) to secure the brackets to the enclosure.

1 U