User Manual

7Rack ATS AP44xx Installation and Quick Start
Mounting Options
You can mount the Rack ATS in an APC by Schneider Electric NetShelter
®
or other EIA-310-D standard
483 mm (19 in.) rack.
Horizontal mounting
1. Choose a mounting position for the Rack ATS with
either the digital display or the rear panel facing
out of the enclosure.
2. Attach the mounting brackets to the Rack ATS
using the provided flat-head screws.
3. Choose a location for the unit.The unit occupies
one or two U-spaces. A notched hole on the
enclosure’s vertical rail (or a number, on newer
enclosures) indicates the middle of a U-space.
Insert cage nuts above and below the notched hole (or
number) on each vertical mounting rail in your chosen
location.
4. Align the mounting holes of the brackets with the
installed cage nuts. Insert and tighten screws.
Recessed horizontal mounting
You can mount the Rack ATS in a recessed configuration by attaching the brackets as shown in the
following illustration:
pdu0352a
pdu0353a
pdu0369a