Installation manual

InRow RD Fluid Cooled Operation and Maintenance26
Rack Inlet
(Rack Inlet Temperature High
Threshold)
Critical • Make sure the Rack Inlet setting is correct in the Set Unit Threshlds
screen.
• If the problem persists, contact APC at a number on the back cover of
this manual.
Supply Air
(Supply Air Temperature High
Threshold)
Critical • Make sure the Supply Air setting is correct in the Set Unit
Threshlds screen.
• If the problem persists, contact APC at a number on the back cover of
this manual.
Return Air
(Return Air Temperature
HighThreshold)
Critical • Make sure the Return Air setting is correct in the Set Unit
Threshlds screen.
• If the problem persists, contact APC at a number on the back cover of
this manual.
No Backup Units Available Warning • Check to make sure cooling units in the group are set to
Configure Unit > General > Role Override > Auto and that cooling
units are available (not in a failed state).
• For assistance, contact APC at a number on the back cover of this
manual.
Alarm Message Severity Action Required