Installation manual

9InRow RD Fluid Cooled Operation and Maintenance
Using the Path statement
Select the main- and sub-menu options specified in the path statement to view or configure a setting. The
path statement lists the main- and sub-menu items you select to navigate to the item to view or modify.
The parts of the path statement are defined below:
Path: Main > Set Password > Change Passwords
Main >
Your starting point is the main menu.
Set Password > Scroll to and select this option from the main menu.
Change Passwords > Scroll to and select this option from the sub-menu.
Subsequent options are listed and defined under the path statement.
Password entry
The cooling unit has two levels of password protection:
• Device password allows Device Users to change basic and environmental settings.
• Admin password allows all privileges granted for Device Users, and also allows the
Administrator to modify settings that control the components in the cooling unit or change
advanced options.
When you try to change a setting, the display interface prompts you to enter your Admin password. The
default value for both the Device and Admin password is apc (lowercase). To enter your password, use
the up or down arrow key to scroll through the available character set. Press the
ENTER key to select the
current character and move the cursor to the next character position. After selecting the last character of
your password, press the
ENTER key once more to submit your password.
Once the password is entered, it remains in effect until the period of inactivity exceeds the Password
Timeout setting.
See “Timeout” on page 19.
Note: Passwords are case-sensitive.