Specifications

InRow RC Operation and Maintenance26
Network Management Card
Set Up Network Configuration
Configure the network settings for the Network Management Card from the display interface. The
management card allows remote control and configuration of the InRow RC.
Network configuration
Path: Main > Configure Network
MAC Address.
Displays the unique network identifier assigned to the Network Management Card at
the factory.
Path: Main > Configure Network > IP Address
You will be prompted to enter an Admin password. Enter the password and press ENTER to return to the
IP Address screen. Press
ENTER again to change the following settings.
IP. Enter the IP address assigned to the Network Management Card of this cooling unit (manual mode
only).
SM. Enter the subnet mask for the Network Management Card of this cooling unit (manual mode only).
GW. Enter the default gateway for the Network Management Card of this cooling unit (manual mode
only).
Path: Main > Configure Network > Boot Mode
Boot Mode.
Set the method by which the Network Management Card will acquire its network settings.
• Manual—Enter the network settings for the Network Management Card.
• BOOTP—Set the Network Management Card to obtain its network settings from a BOOTP
server.
• DHCP—Set the Network Management Card to obtain its network settings from a DHCP server.
• BOOTPDHCP—Set the Network Management Card to search for its network settings from
either a BOOTP or a DHCP server.