Datasheet

14 NetworkAir RM Air Distribution Unit
Installation
Connecting to
the power
supply
To supply power to the Air Distribution Unit:
1. Using one of the supplied power cords, connect the
female end to one of the input sockets on the rear of the
unit. Plug the male end into a UPS or other socket that
provides protected power.
2. To provide redundant power to the unit, use the
remaining socket to connect to a second source of
protected power.
3. Cords may be bundled and tie-wrapped to provide
clearance for other components.
Replacing the
perforated floor
tile(s)
The perforated floor tile(s) in front of the enclosure containing
the Air Distribution Unit can be replaced with solid floor tiles
under these conditions:
• If other equipment in the vicinity is not dependant on the
airflow.
• If under-floor pressure is a concern.
Replacing the perforated floor tile(s) can increase air flow in
other areas of the data center.
AC
A B
FAN
1 2