User manual

Page 6 - 51029197EN/BB
Connection to the UPS
Via an acquisition card
Figure 7 shows connection of the MultiSlot
module to a UPS using an acquisition card
intended for a U-Talk/Basic communications
port. Consult the user manual of the card
concerning configuration in the U-Talk or
Basic modes. The cable for connection to
the UPS is supplied with the acquisition
card.
Via the UPS BUS port
Figure 8 shows connection of the MultiSlot
module to a UPS using an RJ45 cable.
UPS BUS
4
UPS
COM
UPS
BUS
1
U-Talk or Basic
UPS
U-Talk / Basic
Fig. 8
Fig. 7
Installation