User manual

51029197EN/BB - Page 5
Installation
Rack mounting
Figure 5 shows how to install the MultiSlot
module in a 19" rack using the two M6
screws and the two cage nuts positioned at
the desired height on the frame uprights.
The module is not as wide as the rack and
consequently does not block the circulation
of air.
If the temperature inside the
cabinet exceeds 35°C, ventilation
is required or the MultiSlot module
must be installed outside the
cabinet.
Fig. 5
Fig. 6
Adhesive support pads
Figure 6 shows how to attach the four
adhesive support pads under the MultiSlot
module to keep it from slipping on a flat
surface.