User manual

Page 4 - 51029197EN/BB
Installation
Input voltage settings
Before making any connections, check that
the AC power used to supply the MultiSlot
module is compatible with module
characteristics (230V 150 mA 50Hz or 120V
300 mA 60 Hz).
Set the appropriate voltage (230V or 120V)
using the selector 5 (see figure 3).
A 500 mA 250V delayed fuse protects the
module against electrical faults.
The MultiSlot module must be
deenergized (cord removed from
the socket 6 before changing
settings on the selector 5 ).
Once the voltage has been correctly set,
insert the cord in the socket 6 at the back
of the MultiSlot module (see figure 4).
The cord is made up of two active wires and
an earth wire which must be connected to
the installation earthing terminal.
Fig. 3
230V 120V
230V 120V
5
UPS
COM
UPS
BUS
6
UPS
COM
UPS
BUS
6
230V AC / 50Hz
supply selected
120V AC / 60Hz
supply selected
Fig. 4