Datasheet

Basic Installation Procedures
InfraStruXure for Wiring Closets and Computer Rooms 15
Install Rack PDUs
Install vertical APC Rack PDUs in the rear of a
NetShelter VX Enclosure, in the cable channel
directly behind the rear vertical mounting rails.
You can install the Rack PDU in one of two
ways: using toolless mounting pegs (provided)
or the mounting brackets (sold separately).
1. Slide the mounting pegs into the holes
located in the channel in the rear panel of
the enclosure.
2. Snap the Rack PDU into place by pushing
it downward until it locks into position.
Install optional equipment in the enclosures
See also
See the manual included with your Rack PDUs for detailed safety and installation
instructions.
Note
You can mount two Rack PDUs on
one side of the enclosure by using
the toolless mounting method.
See also
See the manual included with your optional InfraStruXure equipment for detailed
safety and installation instructions.