Specifications

21Symmetra PX 48, 96, and 160 kW 400 V and 100 kW 208 V Operation
Replace a power distribution module
1. Switch the breakers to the OFF position.
2. Disconnect the power distribution module’s cable from the load.
3. Open the locking latch on the module and gently pull the module out of the enclosure.
4. Take the replacement power distribution module and open the locking latch. Route the power
cable through the top of the enclosure and slide the power distribution module into place.
5. Secure the latch to lock the module.
6. Switch the breakers to the
ON position.




48 kW
96 and 160 kW
100 kW

