Specifications

Symmetra PX 48, 96, and 160 kW 400 V and 100 kW 208 V Operation16
Change the date and time
Configure input contacts
Configure output relays
1. Select Admin and press ENTER. 2. Select Date/Time and press ENTER.
3. Select Date or Time and change the settings by
using the
UP and DOWN arrow keys. Press ENTER
to save the changes.
1. Select Environment and press
ENTER. 2. Select Input Contacts and press ENTER.
3. Select desired input contact, 1 through 4, select
Configuration, and press
ENTER.
4. Change the settings for name/location, alarms,
severity, and normal state.
1. Select Environment and press
ENTER. 2. Select Output Relays and press ENTER.
3. Select desired output relay, 1 through 4, select
Configuration, and press
ENTER.
4. Change the settings for name and normal position
for the selected output relay.
UPS
Alarms
Power Dist
Switchgear
Environment
Log
Admin
Help
Network Setup
Local Interface
Date/Time
Device ID
Mode: Manual
Format: mm/dd/yyyy
Date: xx/xx/xxxx
Time: xx:xx:xx
UPS
Alarms
Power Dist
Switchgear
Environment
Log
Admin
Help
Input Contacts
Output Relays
Alarm Relay Map
Input Contact:xof4
<contact name>
Status: Normal
Configuration
Name/Location x
Alarms:Enabled
Severity:Critical
Normal:Open
UPS
Alarms
Power Dist
Switchgear
Environment
Log
Admin
Help
Input Contacts
Output Relays
Alarm Relay Map
Output Relay:xof4
<relay name>
Status: Closed
Configuration
Relay x Name
<output relay>
Normal: Closed