Specification Sheet

Bona Prep
®
Technical data sheet
Rev 11 /10
This data sheet r eplaces all previous versions page 2/2
Finishing
4. Abrade the floor once it has dried using two Bona
®
Conditioning Pads (one driving the
o ther) . Beveled edges and any visibly unabraded areas should be cle aned and abraded by hand.
5. Tack the floor again to remove dust using a Bona
®
Mop or a wrung - out cotton towel or cloth
dampened with Bona Prep
®
.
6. Allow the floor to dry completely. Then apply a Bona waterborne or oil - modified finishing system
within 2 hours.
NOTE: If recoating a factory prefinished floor, use only Bona Traffic
®
, Bona Naturale
®
, or Bona
Strong™.
CLEAN - UP: Clean all tools and equipment with water .
STORAGE: Non - flamable – Bona Prep
®
should be stored in a climate controlled environment.
Keep from freezing. Do not store above 100 ° F (38° C).
Item #: Size #/Case
WM700018158 1 Gallon 4
WM700051153 32 oz. 8
Order Information
Maintenance