Instruction manual

Instruction manualREVAMP2600
15
Technical specifications
Dynamic output power 840 W @ 4 Ω
Sine wave power per channel 600 W @ 4 Ω (500 msec)
Minimum output load impedance CH1
and CH2
4 Ω
Input connections 2 x balanced euroblock, 2 x balanced
XLR, 4 x unbalanced cinch with pass
through
Input sensitivity 0 dBV / 1V
Input impedance 22 kΩ
S/N ratio > 98 dB A weighted
THD ch. 1/2 < 0.05% @ 100 W / 4 Ω /1 kHz A
weighted
Frequency response 10 – 24 kHz + 0 / -3 dB
Built-in DSP yes
Protection circuits over current, over temperature, DC
offset, AC and DC over- and undervoltage
Channel separation > 67 dB @ 1 kHz
Damping factor > 60 all channels
APC sytem internal compressor and clip limiter
Power amp topology class H
Power supply toroidal transformer
Cooling forced
Max power consumption 1840W
Operating temperature range 0 to 40°C
Mains operating voltage 230VAC/50-60Hz
Dimensions 483 x 88 x 332 mm (including rack ears)
Net weight 12.1 kg
Gross weight 14.7 kg