Specifications

WWW.APART-AUDIO.COM
2
The APart PMR4000R is a professional multi source music player with integrated
FM RDS tuner, internet radio, UPnP and USB media player, compatible with MP3,
WMA, FLAC and WAV audio files. The unit is equipped with analog outputs,
optical digital output for the digital media player, wired Ethernet and Wifi 2.4G.
The unit can be remote controlled with the included handheld infrared remote
control. The maximum analog output level can be preset at the back to match the
output level of other audio sources. Because this device features a menu guided
setup and operation, it is very practical and user-friendly.
Features
• Please check the packing for any kind of damage upon reception of the goods. If the
packing is damaged, please contact your dealer before opening it.
•Read all documentation before operating your equipment.
•Keep all documentation for future reference.
• Keep the carton and packing material, even if the equipment has arrived in good
condition.
• Should you ever need to send the unit back, use only the original factory packing.
•Do not spill water or other liquids on or into the unit.
• Make sure power outlets conform to the power requirements listed on the back of the
unit.
•Do not use the unit if the electrical power cord is damaged.
• Always operate the unit with the AC ground wire connected to the electrical system
ground.
• If there are high signal levels at the inputs, then please have gain controls on amplifiers
turned down during power-up to prevent speaker damage.
• Do not connect the inputs / outputs of amplifiers or consoles to any other voltage source,
Such as a battery, mains source, or power supply, regardless of whether the amplifier or
console is turned on or off.
• Power down and disconnect the units from the mains voltage before making connections.
• Do not use the unit near stoves, heat registers, radiators, or other heat-producing
devices.
• Do not remove the cover. Removing the cover will expose you to potentially dangerous
voltages.
• Do not drive the inputs with a signal level higher than that which is required to drive
equipment to full output.
• In case of malfunction this device should be serviced by qualified service personnel only.
Important safety instructions