Specifications

INFO@APART-AUDIO.COM
13
Network profile:
Internet radio:
•DHCPenable:activatesuseandswitchesontheautomaticreceptionofnetwork
data.
•DHCPdisable:deactivatesuseandcarriesonwiththemanualentryofnetwork
data.
•IPsettings:settheIPaddressandthesubnetmask.
•Gatewayaddress:setthegatewayaddress.
•DNS:settheprimaryandsecondaryDNSaddress.
•SSID:setthewirelessnetworkidentification.
•Authentication:setthepreferredmethodofauthentication:Open,Pre-shared
key (PSK), Wifi protected access (WPA) or WPA2.
•Encryptiontype:selecttheappropriateencryptiontype:Disabled(off)or
WEP (Wired equivalent Privacy) for open or PSK. TKIP (Temporal Key Integrity
Protocol) or AES (Advanced Encryption Standard).
•Key:nowenterthecodeforthewirelessnetwork.
Entering names is done via the rotary control: highlight a character and press the
rotary control to enter the highlighted character.
•Select“BKSP”todeletethelastcharacterselected.
•Select“CANCEL”tocancelyourinput.
•Select“OK”toconfirmandstorethecharactersyouentered.
If for any reason you want to delete a previously used network profile, enter the
main menu/system settings/network/network profile and selected the network
profile you want to delete. Press the rotary control to confirm the selection. The
network profile will be deleted.
The internet radio allows you to listen to numerous internet radio stations
worldwide. Broadband internet access and a wired or wireless network connection
are necessary to use this feature.
You can store presets for easy access without the need to go through all possible
selection parameters. The last selected radio station will be maintained when
powering off the unit. A list of recently selected radio stations is also stored for easy
access to previously accessed stations.
Storing a radio station to memory:
10 memory presets are available for storing. Tune to an internet radio station.
Press and hold a numeric key 1 to 10 on the handheld remote until “Preset stored”