Specifications

[e-mail]
3
Temporarily remove the protective cap
from the rear of the cabinet and turn the
rotary switch to the position required for
your application. Warning! Never use the
speaker in the 8 ohms position on 100 volt
systems. Always reinstall the protective cap
after selecting the power !
Speaker cable
White lead = speaker +
Black lead = speaker -
Connecting the speaker
Selecting the power
Technical drawing
•Avoid loud feedback from microphones, this can damage your speaker.
• Please check the unit’s condition after unpacking. If the outside of the carton box
has been damaged, inform your shipper immediately.
•This speaker is splash water proof, intended for indoor and outdoor use.
30W
112.5W = 30 + 30 + 15 + 15 + 15 + 7.5
30W 15W 15W 15W 7.5 W
Amplifier power must be equal or higher than total power of all speakers
120 Watt
Amplifier