Specifications

WWW.APART-AUDIO.COM

Volume Control

E-VOLST

• Type : Euro

• Handling power : 2 x 40 watt

• Impedance : Minimum 2 x 4 Ohm

• 24V priority : No

• Attenuation steps : 10

• Build-on box : E-2MODON

• Build-in box : NA

• Dimensions (H x W x D) : 80 x 80 x 76 mm

• Weight : 0.32 Kg

• Colour : white

Introduction

Tech. Specifications

The APart E-VOLST is a stereo volume control that can handle up to 2 x 40 watt in 4 ohm.

It can be used with a standard HiFi amplier to adjust the loudspeaker volume. It is very durable due to the step by

step attenuation in 10 steps.

The E-VOLST is build on a universal chassis that can easily be integrated with Gira, Jung and Euro.

Different cover plates are available for the UK market.

• Keep the inside of the wallbox clear of all wires, this to prevent short circuits between the wires in the wallbox and the

printed circuit of the volume controller.

• Don’t use solid copper conductor wires, the screw connectors on the printed circuit board of the volume

controller are designed for flexible wires.

• Don’t connect more then one wire in each onboard screw connectors of the volume controller.

• Don’t use force when mounting the volume controller in the wallbox.

Mounting

PAGE 1
E-VOLST Volume Control Introduction The APart E-VOLST is a stereo volume control that can handle up to 2 x 40 watt in 4 ohm. It can be used with a standard HiFi amplifier to adjust the loudspeaker volume. It is very durable due to the step by step attenuation in 10 steps. The E-VOLST is build on a universal chassis that can easily be integrated with Gira, Jung and Euro. Different cover plates are available for the UK market. Tech.
PAGE 2
E-VOLST Volume Control • MAX MUSIC POWER 40 WATT • IMPEDANCE : 4-20 OHM Do not connect a loudspeaker with an impedance lower than 4 ohm, this can permanently damage the unit WWW.APART-AUDIO.