Specifications

[e-mail]
15
Input impedance / sensitivity unbalanced
(RCA)/4ohm
10 Kohm / 1 V 0dBV
Inputimpedance/sensitivitybalanced(XLR)
/ 4 ohm
20 Kohm / 1 V 0 dBV
Frequencyresponse(0,-0.5dB) 10 Hz – 50 kHz
THD < 0.05 %
IMD < 0.06 %
Noise >100 DBA
Gain 30dB(36dBbridged)
Damping factor > 200
Dynamics and level control APC,switchablefor2-3or4-8ohms
Power amp circuit design High current, high voltage class G
Efciency(dynamicprogramof10dB,1V
input)
70 %
Protection circuits DC,H F,clip,overcurrent,short-circuit
Temperatureprotection 95°C/ch + transformer 105°C
Cooling convectional, no fan
Power consumption 15VA idle, 600VA full program, 1KVA peak
Mains power requirements 230VAC, 50Hz
General technical specications
Physical specications
Netdimensions(cm)(WxHxD) 48.3X4.4X36
Grossdimensions(cm)(WxHxD) 56 x 10 x 55
Net weight 7.5 kg
Gross weight 9.0 kg
APart-Audio general warranty conditions:
APart-Audio warrants this product to be free of defects in material and workmanship for a period of one* year for parts and for a
period of one* year for labor from the date of original end-user purchase. This warranty is valid only for the original end-user and
cannot be transferred.
During the warranty period APart-Audio orone of its authorized service partners shall either repair or replace any product, free of
charge, that proves to be defective on inspection by APart-Audio or its authorized service representative.