SDS

Product Code: 105812-1636 SDS for: Wood-As-New 1:5 Apache Part #: 99002101
SDS Revision: 06 Generated: 05-14-2015 Page 3 of 6
FLAMMABLE LIMITS: Product is not flammable.
EXTINGUISHING MEDIA: Use an extinguishing agent suitable for the surrounding fire.
FIRE AND EXPLOSION HAZARD: Use water spray to cool unopened containers if necessary to prevent BLEVE
(Boiling Liquid Expanding Vapor Explosion).
HAZARDOUS COMBUSTION PRODUCTS: Under fire conditions toxic fumes should be anticipated.
FIRE FIGHTING: See also Stability and Reactivity section.
FIRE EQUIPMENT: Wear self-contained, approved breathing apparatus and full protective clothing (including eye
protection and boots).
6. ACCIDENTAL RELEASE MEASURES
SPILL/LEAK: Follow your companies established procedures for reporting and/or responding to Chemical
incidents. No action shall be taken involving any personal risk or without suitable training.
See section 8 for recommendations on the use of personal protective equipment.
SMALL SPILL: Stop leak if without risk. Neutralize spill with sodium bicarbonate or lime. Absorb spill with
noncombustible absorbent material, then place in a suitable container for disposal. Clean surfaces thoroughly
with water to remove residual contamination. Dispose of all waste and cleanup materials in accordance with
regulations.
LARGE SPILL: No action shall be taken involving any personal risk or without suitable training.
Stop leak if without risk. Prevent spillage from entering drains and/or waterways. Any release to the
environment may be subject to federal/national or local reporting requirements.
7. HANDLING AND STORAGE
HANDLING PRECAUTIONS: Eating, drinking and smoking should be prohibited in areas where this material is
handled, stored and processed. Wash thoroughly after handling. Remove contaminated clothing and
protective equipment before entering eating areas. Use with adequate ventilation. Avoid formation of
aerosols.
See section 8 for recommendations on the use of personal protective equipment.
STORAGE: Keep container closed when not in use. Store in cool, dry well ventilated area. Keep away from
incompatible materials (see section 10 for incompatibilities). Protect from excessive heat and/or freezing.
REGULATORY: Do not store in unlabeled containers.