Operator`s manual

BULLSEYE
®
3
+
Laser Receiver
System Description
The Apache BULLSEYE 3
+
laser receiver is a rugged, multipurpose,
easy-to-use electronic sensor that detects laser light generated by
rotating laser transmitters. The receiver is designed to work with nearly
all makes and models of rotating lasers and will detect both visible and
invisible beams. When installed, the operator is given visual indication
of the reference plane of laser light’s position relative to the cutting edge
of the machine. The receiver can be adapted to many different types
of construction and agricultural machinery.
The BULLSEYE 3
+
has several selectable settings. Deadband
size (accuracy) has three settings to meet job site requirements. LED
display brightness can be set to meet light conditions. Additional user
preferences can be set and are detailed in this manual.
A super-bright LED display has green on-grade diodes and red high
and low diodes for quick, easy to distinguish grade information.
5 channels of grade position information as well as high or low lost
beam indication are displayed. Individual LED's also inform battery
status and deadband selection.
A strong, durable upper and lower housing made with aluminum
castings and a polycarbonate center section provides a sealed
compartment for the electronics. The electronics are isolated from the
rest of the unit by internal rubber shock-mounts, protecting the unit
from shock and vibration damage. Clamps on each end securely grip
1.66” to 2.00" (42 mm to 50 mm) round tubing or 1.50" (38 mm) square
tubing with rounded corners.
An accessory connector is provided for the optional RD14 remote
display, machine power cable, or rechargeable battery charger. The
connector may also be used to communicate with the Model CB24
+
control box for automatic control. The center two inches (5 cm) of the
receiving area contains proportional photocells which optimizes
automatic control performance.
2