Operator`s manual

14
Maintenance and Care
The user of this product is expected to follow all operating and safety instructions
of this manual and of the machinery operator's manual. Perform periodic checks
of the product's performance. The manufacturer or its representatives assume no
responsibility for results of the use of this product including any direct, indirect,
consequential damage, and loss of profits. Check your work frequently.
The BULLSEYE 3
+
Laser Receiver was shipped in a protective carrying case. If
the unit is transported from job to job inside its protective case and normal instru-
ment precautions are followed, the unit will provide many years of service.
Do not wipe dust or dirt off the laser receiver with a dry cloth as scratching
could occur, possibly damaging these surfaces. Use only a good quality
glass cleaner with a soft cloth on all external components. If these surfaces
have hardened concrete or other materials on them, take the system to your
Authorized Service Center for cleaning.
If the system will not be used for a 30 day period or more, it is recommended
to remove the batteries from the receiver.
Refer to your state or local requirements for the disposal of batteries. Be sure
to dispose of all batteries properly.
Safety
WARNING: When working near construction or agricultural
machinery, follow all safety precautions as described in the
machinery's user manual.
WARNING: When excavating, follow all excavation and trench
safety regulations and practices.
CAUTION: Be aware of all overhead obstructions and
electrical power lines. The receiver and mast may be higher than
the machinery. Remove when transporting machinery.
CAUTION: Do not disassemble any part of the receiver other than
to replace batteries. The receiver is to be serviced by authorized
Apache Technologies service personnel only.