User manual

English
---------------------------------------------------------------------------------
10. Frequently asked questions
Q: If I make a mistake while recording data, what should I do?
A: If the display shows an error message, please check the error code list and
follow the instructions shown on the display to solve the problem.
Q: Why can’t I find the recorded data?
A: The data will be saved in the new folders named “001”, “002” and so on in
sequence. So please go to next layer of folders to locate your data.
Q: What’s the recording speed in fast burn mode?
A: It takes approximately 4 minutes to record data on a 256 MB memory card.
Q: What’s the battery usage?
A: The power of the supplied rechargeable battery can record approximately
the data on thirty-six 256 MB memory cards.
Q: If there is no signal from the TV set in Movie mode, what should I do?
A: If the AD330 is currently in Movie mode, please check if the display has
stopped flashing and the RCA cable is connected properly. If there is a signal
conveyed out, the TV screen will show the AD330 display.
Q: Why can’t I see the photos from the memory card via TV?
A: Ensure the AD330 is in Photo View mode and the TV is receiving a signal.
Check if the photo file format is JPEG as the AD330 supports only JPEG
(baseline) formats.
Q: After I followed the instructions to connect the AD330 to a PC, it still
doesn’t work. Then what should I do?
A: Under the Windows 2000 system, there is no need to install a driver but
Service Pack 3 is needed. If you have difficulty in using the AD330, please
visit our website www.apacer.com for more related information.
39