User manual

English

---------------------------------------------------------------------------------

7. Driver Installation

7.1 Install the burning software.

7.1.1 Insert the supplied CD into the

CD-ROM or the AD330.

7.1.2 After the following image shows,

select the appropriate option to proceed

with the installation.

7.1.3 Some software will require you to

reboot the PC after the software installation

completed, please follow the instructions

shown on the screen.

7.2 Under the Windows 2000 operating system

Make sure that Service Pack 3 is installed properly before using with

Windows 2000 – please refer to your Windows manual.

If the Service Pack 3 is not installed, please go to the Microsoft Windows

Update website to download and install it.

7.3 Usage with Macintosh systems

There is no need to install a driver, as the AD330 is compliant with Mac OS X

(versions after 10.1.3).

After your MAC PC boot up is complete, connect the AD330 to the USB

port directly from the system (Do not connect from the USB port on the

keyboard, monitor or USB hub.). Then turn on the AD330 for use.