User manual

English

---------------------------------------------------------------- -

----------------

3. Quick Start

3.1 Before Use

1. Make sure the power switch is in the OFF position. Plug

in the supplied AC adapter or insert the supplied rechargeable battery (if

have the battery please see picture for the battery placement and direction)

then switch the power on.

The Power LED light turns green and then you can start using your AD330.

2. After the AD330 has started normally, the display will show the main

screen.

3. Press the “Left” or “Right” button to switch to other functions. Press

“OK” to start the operation you selected.

4. If you don’t use the AD330 for more than 3 minutes (the default setting),

the display will shut down to save battery or AC electrical power. Once you

press any button on the panel or remote control, the display returns to the

normal mode and you can select the functions you want.

Note:

Before using the AD330 for the first time, charge the battery for a full 8 hours.

Avoid using the AD330 on the edge of a desk or any other unstable places.