User manual

PARTS

• Mobile Lithium Jump Starter

• 230V AC charging adapter

• 12V DC cigarette plug charging adapter

OPERATION

Before the 1

operation: This unit is delivered in a partially charged state. Please fully charge

the device after your purchase and your first use. Only use the delivered 12V charger.

CHARGING THE BATTERY

Before the 1

operation: This unit is delivered in a partially charged state, due to storage

requirements. Please fully charge the device after your purchase and before your first use.

Only use the delivered 12V charger.

Battery Life

Recharging the battery after each use will prolong battery life. Do not permanently charge the

battery, but also avoid to (frequently) fully discharge the battery, as this will reduce battery life.

Note: The POWER-Switch (6) has to be turned ON when charging the unit.

1 START Button 2 LCD Display (8-14) 3 LED-LIGHT Mode

4 USB Port 1 A 5 USB Port 2,1 A 6 12V INPUT

7 Battery Clamps 8 12V OUTPUT 9 Attention

10 internal Battery Voltage 11 internal Batt. Capacity 12 Ready to Boost

13 Warming-up (PRE-HEAT) 14 Car Battery Voltage 15 Over-Heat Warning