User Manual

ManualsBrandsAOYUE ManualsSoldering EquipmentSoldering Station AOYUE INT 2930 (110 V)

Manufacturer:

AOYUE INTERNATIONAL LIMITED

Jishui Industrial Zone, Nantou, Zhongshan City,

Guangdong Province, P.R.China

http://www.aoyue.com

Instruction Manual

Instruction ManualInstruction Manual

Instruction Manual

Thank you for purchasing the Aoyue Int2930 Soldering Station.

Please read the manual before using the unit.

Keep manual in accessible place for future reference.

Soldering Station

Int2930

Int2930Int2930

Int2930

Summary of content (8 pages)

PAGE 1
Int2930 Soldering Station Instruction Manual Thank you for purchasing the Aoyue Int2930 Soldering Station. Please read the manual before using the unit. Keep manual in accessible place for future reference. Manufacturer: AOYUE INTERNATIONAL LIMITED Jishui Industrial Zone, Nantou, Zhongshan City, Guangdong Province, P.R.China http://www.aoyue.
PAGE 2
This manual is designed to familiarize and instruct the technician with the proper operation and maintenance of the equipment. The “Care and Safety Precautions” section explains the hazards of using any type of soldering or reworking device.
PAGE 3
BASIC TROUBLESHOOTING GUIDE PROBLEM 1: THE UNIT HAS NO POWER TABLE OF CONTENTS 1. Check if the unit is switched ON. 2. Check the fuse. Replace with the same type if fuse is blown. 3. Check the power cord and make sure there are no disconnections. 4. Verify that the unit is properly connected to the power source.
PAGE 4
CARE AND MAINTENANCE PRODUCT DESCRIPTION The Aoyue Int2930 is a 70 Watt high performance soldering iron. It 1. Tip Temperature : is equipped with a quick heating ceramic heater for fast response and heat recovery. The composite tip designs allows easy tip change and best in class performance. It has various functions and features such as digital offset, may cause thermal shock to components. Always use the lowest possible temperature when soldering.
PAGE 5
SAFETY PRECAUTIONS OPERATING GUIDELINES To de-activate the system lock: CAUTION: Improper usage can cause serious injury to personnel and/or damage to equipment and work area. For your own safety, please observe the following precautions. 1. With the unit turned On, press and hold the INCREASE, SET and DECREASE button for more than 10 seconds. 2. The display would switch from “SAFE” to the set temperature ● display when system lock has been disengaged.
PAGE 6
OPERATING GUIDELINES SPECIFICATION Voltage Input : Station Dimensions: Weight: 3. “t000” indicates that the sleep function is currently turned off. To available in 110V / 220V 110(w) x98 (h) x 155 (d) mm Sleep timer is adjustable from 2 to 60 minutes. 1.5Kg 4. To save the settings, repeatedly press the SET button until the Power Consumption: 70W Temperature Range: 200°C - 480°C Heating Element Ceramic heater Output voltage: 24V display shows the word “SAVE”.
PAGE 7
OPERATING GUIDELINES OPERATING GUIDELINES 6. To save the settings, repeatedly press the SET button until the display shows the word “SAVE”. Press the decrease button to save and exit from the system configuration mode. 7. The two quick jump settings has now been configured and can be accessed by simultaneously pressing the “INCREASE” and “SET” button for the first Quick jump level. And simultaneously pressing the “DECREASE” and “SET” button will access the second quick jump level. REMINDERS: 1.
PAGE 8
OPERATING GUIDELINES OPERATING GUIDELINES B. TEMPERATURE CONTROL 5. Adjust the offset number until the external temperature sensor 1. Turn the power ON. reading is equal to our set temperature. 2. The display would show a number between 200 to 480 indicating the set temperature. 6. Repeatedly press the SET button until the display shows the word “SAVE”. Press the idecrease button to save and exit from the system 3. The display would then switch to showing the actual temperature. 4.