Instruction manual

16
OPERATING GUIDELINES
● Thesolderingironanddesolderinggunoperatingtemperatureis
configurablebetween200°Cand480°C
● Becauseofthedifferenceintheheatingelementandsizeofthe
solderingirontipanddesolderinggun,thesolderingironwillheat
upfasterthanthedesolderinggun.Thisisnormalanddoesnot
haveanyimpactonthesystem’sperformance.
● Therewillbeaslightdropintemperaturedisplayoncethetrigger
ofthedesolderinggunisused.Thisisduetorapidintakeofairin
whichtemperatureissignificantlycoolerthanthedesolderinggun
tip.Whenthesystemdetectsthis,itwillautomaticallyadjustthe
temperaturetocompensateforthetemperaturedifference.
NOTICE: When using the desoldering gun and
soldering iron simultaneously, the smoke absorbing
functionofthesolderingironwillbedeactivated.This
ittogiveprioritytothedesolderinggun.
17
OPERATING GUIDELINES
E.HotAirGunSafetyFeature
Thesystems’hotairgunhasasafetyfeaturetolimitthetemperature
rise to no more than 3 degrees per second. The 3 degrees per second
limit is an industry standard recommendation to minimize component
damageduetoarapidincreaseoftemperature.Thisprotectionfeatureis
activated by default and can be deactivated if desired. Below are the
proceduresonactivation/deactivationofthissafetyfeature:
1. Turn“OFF” systemandensureall function switchesare in“OFF”
position.
2. Press and hold this two buttons. The Hot Air Gun Automate
FunctionSelector(“17”fromthecontrolpanel)andtheUPbutton
of the DESOLDER GUN TEMPERATURE adjustment button.(“5”
fromthecontrolpanel).
3. With the two buttons held in the pressed position turn
“ON”thesystembyswitchingtheMainPowerSwitch(“10”).
4. Releasethe buttonswhen“S AFE OFF ” appears ontheHot Air
Gun Temperature Display/Hot Air Gun Airflow Display . Release
thebuttonswhenthisisdisplayed.
5. The display below the word “SAFE” will indicate whether the
safety featurein “On” or “OFF” by displaying the corresponding
wordontheHotAirGunAirflowDisplay Thesystemwillproceed
tostandbymode.
6. Toswitchthesafetyfeature“On”or“OFF”simplyrepeatsteps1to
5.
7. The Status of the safety feature shall remain in effect until it is
manuallychangedbyfollowingprocedure1to5.