Instruction manual

12
OPERATING GUIDELINES
A. INITIAL PROCEDURES
1. Plug the device to the main power source using the power cord
providedinthepackage.
2. With all function switches deactivated and all terminal connections
properly secured, switch ON the device by activating the main
powerswitch(“9”fromthecontrolpanel).
B. HOT AIR GUN
1. Followtheinitialproceduresabove,“A.INITIALPROCEDURES”.
2. Activate“HotAirGun”switch(“14”fromthecontrolpanel).
3. Thesystemwillimmediatelystartto blowairatan airflow rateof
51whilerapidlyandsafelyincreasingtheairtemperatureto100°C
(default system operating parameters). These values will be
reflectedfromthe Hot Air GunAir Temperature and Air Pressure
display panels, “11” and“12” from the control panel,respectively.
Themetalballinsidetheairgauge(“1”fromthecontrolpanel)will
also settle somewhere in the middl e of the visible area indicating
that the system is blowing air at an average or normal rate. (See
illustrationsonthenextpage.)
3. The display panels, 11 and 12 will temporarily show the product
name in a scrolling manner and then display “OFF” on both rows
once the scroll is finished(see below illustration). The system will
remainatthisstateuntiltheuseractivatesafunction.
IMPORTANT:InitialcontrolpanelsettingincludestheBLOWER/VACUUM
ACTIVATIONswitch(“10”fromcontrolpanel)setto“Blow
17
OPERATING GUIDELINES
ADDITIONALNOTES:
1. ThealternativetofirststepaboveistopresstheRESETbuttonthenholdt heUP
buttonoftheAIRPRESSUREAdjustmentbuttonsuntil“L05”isdisplayed.Note
thatpressingRESETremovesuserdefinedconfigurations.
2. Thecount downtimerisconfigurablebetween 1 and 20 minutes.
E. Auto-Stand-By Mode (Hot Air Gun)
ThedevicehasabuiltintimersuchthatiftheHotAirGunsitson
its handle and remainidle for a certain period, the device will switch
indefinitely to standby mode (provided the power del ivered to the
systemremain uninterrupted). Once the countdown time has elapsed,
thesystemwillblowair(atroomtemperature)ata maximumratein
ordertobringdownthetemperature.Duringthistime,theprefixofthe
display for Hot Air Gun ai r temperature will change from “A” to “d”.
Oncethetemperaturedropstoapproximately90°C,theHotAirGunwill
automatically stop and show an al ldash display indicating that the
systemisnowonstandby.
The device will automatically switch back into operation with the
last userdefined parameters, i.e., hot air gun temperature, airflow
level,etc.,whentheHotAirGunis liftedagainfromthehandle.
By default, the system has a5minute countdown time. This can
bealteredbythefollowingprocedures.
1.Uponsystemstartup,whiletheproductnameisscrollingfromthe
display panel, hold the UP button of the AIR PRESSURE
Adjustmentbuttonsandwaituntil“L05”isdisplayed.
2.AdjustthetimeusingtheUPandDOWNbuttonsoftheHOTAIR
GUNTEMPERATUREAdjustmentbuttons.
3.Confirm the change by pressing the DOWN button of the AIR
PRESSUREAdjustmentbuttons.
4.Thesystemwillautomaticallyswitchbackintooperation anduse
thedefinedcountdownparameter.