Instruction manual

10
CONTROL PANEL GUIDE
LEGEND:
1—AirflowGauge
2—HotAirGunTemperatureAdjustmentButtons
3—HotAirGunAirflowAdjustmentButtons
4—SolderingIron/DesolderingGunTempControlButtons
5—CalibrationUtilityTerminal
6—HotAirGunOutputTerminal
7—SmokeAbsorberTerminalorVacuumCap
8—SolderingIron/DesolderingGun6PinReceptacle
9—MainPowerSwitch
10—Blower/VacuumActivationSwitch
11—HotAirGunTemperatureDisplay
12—HotAirGunAirPressureDisplay
13—SolderingIron/DesolderingGunTemperatureDisplay
14—HotAirGunActivationSwitch
15—ResetButton
16—SmokeAbsorberSwitc h
17—SolderingIron/DesolderingGunActivationSwitch
19
ADDITIONAL NOTES on AUTO-SLEEP MODE
1. Thedefault timebeforethesolderingironorthe desolderinggun
goes to sleep mode is 30 minutes. This is also fixed and non
configurable.
2. Once the system determines that the time has elapsed, it will
gradually decrease the temperature of the soldering iron or the
desolderinggunthenshowthefollowingfromthedisplaypanelof
theSOLDER/DESOLDERTEMPERATURE.
ADDITIONAL NOTES:
SOLDERING IRON and DESOLDERING GUN
1. Because of the difference in the heating element and size of the
solderingi rontipanddesolderinggun,thesolderingironwillheat
up faster than the desoldering gun. This is normal and does not
haveanyimpactonthesystem’sperformance.
2. Therewillbeaslightdropintemperaturedisplayoncethetrigger
ofthedesolderinggunisused.Thisisduetorapidintakeofairin
whichtemperatureissignificantly coolerthanthedesoldering gun
tip. When the system detects this, it will automatically adjust the
temperaturetocompensateforthetemperaturedifference.
3. To deactivate the autosleep mode, deactivate the SOLDER IRON
then activate it again, this time, without holding the Soldering /
Desoldering Temperature Adjustment buttons. Note that pressing
this will also remove the previous temperature value. Re
adjustmentmaybenecessary.
OPERATING GUIDELINES