Installation Guide

Table Of Contents

Preparation Before Installation

1.This Faucet system needs to be installed to the wall, please make sure check all the

size according to the instruction before installation

2.Clean the impurity and sludge in the hose before assembling to avoid leaking

3.Proper Water pressure should between 0.1Mpa-1.0Mpa

4.Turn off the water supply before installation

1.A universal 4-min pre-installed

water pipe is required

2. Each pipes shall be pressure

tested to ensure no leakage

Instruction Manual

Faucet

Product Dimensions Installation drawing

10.63"

6.3"

3.15"

G½

PAGE 1
Preparation Before Installation Faucet Instruction Manual 1.This Faucet system needs to be installed to the wall, please make sure check all the size according to the instruction before installation 2.Clean the impurity and sludge in the hose before assembling to avoid leaking 3.Proper Water pressure should between 0.1Mpa-1.0Mpa 4.Turn off the water supply before installation Product Dimensions Installation drawing 1.A universal 4-min pre-installed water pipe is required 10.63" 6.3" G½ 3.15" 2.
PAGE 2
Installation drawing Installation drawing 5. Turn into the tube and tighten it 3. Ring leakage-proof raw material belt 4. Garnish with a cup 6.