User Manual

TC
EN
1716
System Backup Guide
1
Please plug in the USB disk which is at least 20GB in capacity to
make the original image
(backup the data in USB rst. All data will be
eliminated during the creation of recovery USB disk)
2 Insert the driver disk to your optical drive and run the install of
“System Backup”
(for none-ODD model, please use USB ODD device or
download from http://www.aorus.com.)
3 Run the “System Backup” after nishing the install.
4 Select your USB disk from the drop-down list and start to create
the recovery USB disk.
5
■
The window will pop out when the creation of recovery disk is done.
■
Please press F12 on starting the system when you need to restore the system. Select “boot from recovery
USB disk” and the system will be restored.
■
The time needed for restore will be around 30 mins(time needed may vary by USB disk model) .
WARNING
■
You can backup original recovery image through this application in case of losing by device damage.
■
You can backup original recovery image to USB disk and restore the system if any storage system replacement
with the recovery USB disk.
■
Before you restore the system through the recovery USB disk, please make sure that you have already made
the backup of your data.
■
Please do not shut down or un-plug the system when performing backup through recovery USB disk.
>20G