Congratulations on your purchase of the AORUS Notebook! EN This Manual will help you to get started with setting up your notebook. For more detailed information, please visit our website at http://www.aorus.com. All specifications are subject to the manufacturer's configuration at the time of shipping and may change without prior notice,written or otherwise. Using AORUS Notebook for the First Time TC SC KR 4 2 GR 3 FR 1 1 Connect the the power cord to the AC adapter.
EN TC SC KR GR Switching on the Power After you turn on the notebook for the very first time, do not turn it off until the operating system has been configured. Please note that the volume for the audio will not function until Windows® Setup has completed. Booting Up the notebook for the First Time FR Depending on your configuration, the Microsoft® Windows® Boot Screen may be the first screen that you will see as the notebook starts up.
Your AORUS Notebook Tour 1 2 EN 3 4 5 1 Webcam Status LED Indicator 2 Webcam 3 Light sensor 4 Microphone 5 Power Button 6 TouchPad 7 Battery Indicator Button 8 LED Indicators Press the right button of touchpad to check the remaining battery power. Right click to show the remaining power percentage. As shown below, the battery life indicator is available when the laptop is shut down, in stand-by or hibernation.
EN 3 TC 1 4 2 6 5 SC KR 7 8 1 Kensington Lock Slot 2 Ethernet Port 3 Surround Port 4 D-sub (VGA) Port 5 USB 3.0 Port 6 Headphone Jack 7 Microphone Jack 8 Speaker Enjoy triple display visual pleasure by connecting HDMI, mini-DP and Surround port with 3 monitors (same model number). *Caution: (1) Surround port is compatible with regular HDMI cable connecting television and PC. (2) Connect HDMI or mini-DP port to external monitor for dual screen display.
EN 1 2 TC 1 DC-in Jack 2 USB Port 3 Subwoofer SC 3 KR Warning: DO NOT remove the built-in lithium battery. For any service needs, please contact your local AORUS Authorized Service Center.
Hotkeys EN The computer employs hotkeys or key combinations to access most of the computer’s controls like screen brightness and volume output. To activate hotkeys, press and hold the key before pressing the other key in the hotkey combination. Hotkey TC SC Function Description Fn + F1 Sleep Put the computer in Sleep mode. Fn + F2 Wireless LAN Turn the Wireless LAN function ON and OFF. Fn + F3 Brightness Down Decrease the screen brightness.
X7 Operation manual EN X7 equipped with many unique features, providing user an exceptional gaming experiences. Surround Port TC Surround port is located on the left side of X7. User may connect X7 up to three external monitors with HDMI, mini Display and Surround port, presenting true visual surround effect and enjoy outstanding gaming experience. Surround port is compatible with television , PC’s standard HDMI cable; however, only HDMI port and mini-DP support dual screen display.
EN Killer LAN Killer LAN can automatically adjust the priority of network transmission, allowing the user to have the best gaming network speed, by effectively reducing ping values and gain sequence control over different softwares that require network packet.
EN TC SC KR 8GB single: installed on the 1st memory slot. 4GB/8GB two: Install on the 1st and the 3rd memory slot. 4GB/8GB three: installed on the 1st, the 2nd and the 3rd memory slot. 4GB/8GB four: mounted on four memory slots. GR Battery Protection When battery is in use for a period of time (not connected to power source and in high performance mode), Mass power discharging on battery in a short period of time may cause battery to run at high temperature and may shorten its lifespan.
X7 Command & Control EN Command & Control is a software that integrates a list of basic settings to a single interface, providing user a faster and better experience when customization is needed. Hotkey TC SC Function Description GPU SLI Switch Enable or disable GPU SLI, when slave GPU turns off, it may increase battery life. Fan Controller Adjusts fan speed according to user's preference.
Brightness Setting Adjust Screen brightness. Wi-Fi Switch Turn ON or OFF Wi-Fi connection. Bluetooth Switch Turn On or Off Bluetooth connection. Power Plan Setting Adjust the power plan by user usage in order to obtain maximum battery life or performance. External Monitor Setting Switch between the computer screen and the external display video output, or simultaneous display. Font Size Setting Adjust font size. EN TC SC KR GR Backlit Keyboard Switch Turn On or Off keyboard backlit.
Macro Engine Instruction EN Welcome to use Macro Engine! Macro Engine makes it much easier for you to control your Macro Key on AORUS X7, or other AORUS peripheral such as K7/M7. You can deal with complex key stroke combination by just one press on macro key, which brings you benefit both in work and game. Before using Macro Engine, please read following guide, thanks. TC 1 Launch Macro Engine You can find the shortcut of Macro Engine on desktop. Just double click it.
3 Using Macro Engine 1 EN Set Macro Key to basic function a. Click the G button on the left-top of the keyboard to switch to the Macro Key group you would like to use. b. Click the Macro Key function brick. 2 TC c. Double-click the function you would like to us(ex. open browser) in the basic function area. The Macro Engine will ask if you would like to save the configuration. Please press “Yes” to complete the setting. SC 2 Set Macro Key to custom macro a.
EN 18 TC 3 1 SC 14 2 15 4 6 7 5 8 9 13 10 KR 11 12 GR 16 17 d. The overview of macro record panel (you can record your own macro here) 1. Start recording: Click when you’re about to record the macro 2. Disable Pause Stop recording: Enable/Disable Pause Stop recording 3. Macro Name: Set the name of this macro FR 4. Record type: You can choose to record only mouse(or keyboard) movement, or record both. You can also decide to or not to record mouse position. 5.
EN 10. Key down: drag the icon into move list if you want to record the constant move of pressing certain key 11. Key up: drag the icon into move list if you want to record the constant move of releasing certain key TC 12. L ocation command: drag this icon into move list if you want to record certain mouse location. 13. Move List: list down all the action you recorded 14. Import icon: Set icon for this macro. You can use default icon or upload your own icon 15. Export macro: Export your macro SC 16.
Setup Your System for RAID 0/1 EN WARNING ●● Please backup your data before you build and run RAID 0/1 on your system. ●● RAID 1 needs two storage drives of the same specification and capacity in your laptop. TC ●● R AID 0 needs two storage drives of the same specification in your laptop. Different capacity is acceptable. 1 • Press F2 when computer starts to Enter BIOS setup utility. • Go to Advanced > SATA configuration. SC 2 • Change "SATA Mode selection" from "AHCI" to "RAID".
System Backup Guide EN WARNING ●● You can backup original recovery image through this application in case of losing by device damage. ●● You can backup original recovery image to USB disk and restore the system if any storage system replacement with the recovery USB disk. ●● B efore you restore the system through the recovery USB disk, please make sure that you have already made the backup of your data. ●● Please DO NOT shut down or un-plug the system when performing backup through recovery USB disk.
Recovery Guide EN System Recovery (Restore your laptop operating system) When something is going wrong with the laptop operating system, the storage of the laptop has a hidden partition containing a full back up image of the operating system that can be used to restore the system to factory default settings. TC Note ˙˙ If the storage has been switched or the partition deleted, the recovery option will no longer be available and a recovery service will be needed.
EN A progress indicator bar will show on the window when the recovery process is running. Please make sure the ACadapter is plugged in and do not turn off the laptop. 4 TC SC Reboot the laptop after the system recovery is complete. 5 KR GR Windows 8.1 Recovery Guide 1 2 FR Turn off and restart the laptop. During the laptop turn on process, press and hold F9 key to launch the tool.
EN 3 Choose “Troubleshoot” to enter the recovery settings. (Also you can choose “Continue” to exit recovery system and continue to Windows 8.1 for files or data backup.) There are two options for system recovery ˙˙Refresh your PC TC You can refresh your laptop to improve the system stability without losing your files. ˙˙ Reset your PC If you want to remove all of your files, you can reset your PC completely. Caution: All personal data and files will be lost.
EN System Image Recovery Recover Windows using a specific system image file. TC Automatic Repair Fix problems that keep Windows from loading. Command Prompt Use the Command Prompt for advanced trobleshooting. SC UEFI Firmware Settings Change settings in your PC’s UEFI firmware. Startup Settings Change Windows Startup behavior.
Appendix EN Warranty & Service: Warranty and service and related information please refer to the warranty card or service website as the below link: http://www.aorus.com/ TC FAQ: FAQ (Frequent Asked Questions) please refer to the below link: http://www.aorus.
