Specifications

USING THE SUPPLIED “
““
“SR2200 CONTROL SOFTWARE”
””
”
The software is supplied "as is" for testing purposes, with no warranty nor formal support.
The “SR2200 CONTROL SOFTWARE” only recognizes the receiver’s RS232C connector.
If your PC (particularly laptops) does not feature a RS232C port, you may alternatively use a
“USB to SERIAL” adapter.
System requirements:
• IBM PC compatible receiver with an available RS232C port.
• Microsoft® Windows® 98 up to Vista (32 bit). 64bit systems not supported.
• Pentium® 300MHz processor or faster
• RAM and hard disk space requirements are negligible.
① Connect the SR2200 to your PC using a serial cable. Make sure that you have powered on
the SR2200.
In case you would like to use a “USB to serial” adapter, install this adapter first as specified by
the manufacturer’s instructions.
② Install and launch the control software. The main control window looks like this:
The default COM PORT 1 setting
should allow you to control your
receiver right away. Depending on you
PC’s configuration, the COM PORT to
which you connected the SR2200 can
be different from COM1. In this case it
is necessary to select the appropriate
number as pictured on the right.