Specifications

MEMORY DATA
mmmF:nn nn  nn (To display the original 16
byte data)
mmmF: xx xx (enter data instead of xx,
separate with blank space )
CMA00F 5A C3   5A C3 ==>Changed to
00 00, Flash memory is initialized with [RESET] or
[PWR-ON].
- MODIFY FLASH
MM W
MMmmmF nn nn nn nn  nn (At the address
mmmF, 16-BYTE DATA is input)
MEMORY
- PLL UNLOCK
LW W LWnn  nn = 02 - 20 ms ( DEFAULT = 02 )
WAIT-TIME
(Time setting for PLL lock after frequency change.
Wrong timing might create PLL errors.)
LW R LWnn
- SQ WAIT-TIME
SW W SWnn  nn = 00 - 50 ms ( DEFAULT = 10 )
Signal squelch check time after the PLL is locked.
SW R SWnn
- BIRDIE CANCELL
PLn W
Shifting the PLL data from the current reception
frequency.
REQUEST
n = 0  OFF
n = 1  +200K
n = 2  -200K
PL R PLn
- MAIN VERSION #
VR R VR  MAIN VERSION #
VR yyyy-mm-dd
- VFO DEFAULT
CL [cr] W CL Reset the VFO to default.
- RESET
RS [cr] W
Flash ROM is re-initialized, after switching the
receiver off and on again.
( SRCH-DATA and MEM-DATA will be lost! )
- SERIAL #
SNnnnnnnnnnn W
SNnnnnnnnnnn  nnnnnnnnnn  SERIAL # ( 10
digits )
SN [cr] R SNnnnnnnnnnn