Specifications

current memory data to VFO.
n = 0  VFO-A
: :
n = 8  VFO-I ( DEFAULT )
n = 9  VFO-J
- MEM-CH READ
MRmnn W MR  READ CURRENT MEMORY DATA
MRmnn  m = 0 - 9  BANK # / nn = 00 - 99 
CH #
- MEMO WRITE
MW W
MW  To save the data of the frequency currently
being received. Automatic memory channel
allocation.
- MEMORY BLANK
MB R MBm  m = 0 - 9 ( BANK # )
CHANNEL LIST
Searches for available channels in a bank.
Channels are displayed by groups of 10, delimited
by [---].
example: 002 005 028 034 044  078 ---
- SELECT PRIO-CH
PPmnn W
PPmnn  m = 0 - 9  BANK # / nn = 00 - 99 
CH #
PP R
PPmnn RFnnnnnnnnnn ( NORMAL ) or RF---
( BLANK )
- INTERVAL TIME
TInn W TInn  nn = 01 - 20 sec ( DEFAULT = 05 sec )
OF PRIORITY
TI R TInn
- PRIO ON/OFF
PQn W PQn  n = 0 or 1
n = 0  OFF PRIORITY OPERATION
n = 1  ON PRIORITY OPERATION
PQ R PQn  n = 0 or 1
- LEVEL WAIT
LTnn W LTnn  nn = 01 - 95
- Time during which the level is put on hold until it
stabilizes.
n = 1  APPROX 1 ms
LTnn R LTnn
- DISPLAY FLASH
DMnnnn R
DMmmmm  mmmm = 0000 - FFFF ( ROM
ADDRESS ) Last of 4 digits must be "F".
MEMORY
DMmmmF:nn nn  nn  16 bytes per line, 8
lines.
(Space command allows view of following ROM
address )
- EDIT FLASH-
CM [SPACE ] W
CMmmmm  mmmm = 0000 - FFFF
( ROM-ADDRESS )