Specifications

- LEVEL-SQUELCH
DBnnn W DBnnn  nnn = 000 - 255 (Default is 000 for off)
THRESHOLD
This command can be applied to VFO, MEMORY
and SEARCH DATA
When the optional Remote Control Panel is
connected, the AF-volume must be turned to
minimum for the command to function.
DB R DB nnn
- AF-GAIN
AGnnn W AGnnn  nnn = 000 - 255 (Default is 255)
When the optional Remote Control Panel is
connected, the AF-volume must be turned to
minimum for the command to function.
AG R AG nnn
- MANUAL-GAIN
MGnnn W MGnnn  nnn = 000 - 255 (Default is 255)
AGC must be set to OFF.
MG R MG nnn
- SELECT SQUELCH
SQn W n = 0  NOISE-SQ (DEFAULT)
n = 1  LEVEL-SQ
SQ R SQn
- SIGNAL-LEVEL
LM R
ATn AMn NSQm LMnnn  When NOISE-SQ is
selected ( nnn = 000 - 999 )
ATn AMn LSQm LMnnn  When LEVEL-SQ is
selected ( nnn = 000 - 999 )
m = 0  SQUELCH closed
m = 1  SQUELCH open
- AUTO SIGNAL
LCn W n = 0  OFF
LEVEL
n = 1  ON ( When the squelch opens, signal
level and frequency are returned )
LC Ｒ LCn
Ｒ SQm LCnnn RFnnnnnnnnnn
m = 0  When NOISE-SQ is selected.
- SCAN/SEARCH
SGn W
When scan/search is in operation: when it stops,
the squelch opens and closes again. Then
RE-START CMD
scan/search resumes . This SG command repeats
the process.
n = 0  NO-OPERATION
n = 1  Re-starts [SG]
SG R SGn