Specifications

47
6-12-1 Configure rear speaker
To access the configuration menu, push the FUNC key and then push the 7 key.
Push the down arrow key to move the cursor to the “REAR SP” selection point. This menu is
to configure the rear speaker. Use the main tuning dial, the right arrow key or the left arrow
key to select the desired rear speaker setting (ON or OFF).
Push the ENT key to accept the data and return to a standard display. Alternatively, push the
ESC key to abort entry, or, push the down arrow key to move to the next item on the
configuration menu (FRONT SP).
6-12-2 Configure front speaker
(Note: This function is available only when an optional separation kit is used)
To access the configuration menu, push the FUNC key and then push the 7 key.
Push the down arrow key to move the cursor to the “FRONT SP” selection point. This menu
is to configure the front speaker. Use the main tuning dial, the right arrow key or the left
arrow key to select the desired rear speaker setting (ON or OFF).
Push the ENT key to accept the data and return to a standard display. Alternatively, push the
ESC key to abort entry, or, push the down arrow key to move to the next item on the
configuration menu (PHONES).
6-12-3 Configure head phones output
To access the configuration menu, push the FUNC key and then push the 7 key.
Push the down arrow key to move the cursor to the “PHONES” selection point. This menu is
to configure the headphones output. Use the main tuning dial, the right arrow key or the left
arrow key to select the desired head phones output setting (ON or OFF).
Push the ENT key to accept the data and return to a standard display. Alternatively, push the
ESC key to abort entry, or, push the down arrow key to move to the next item on the
configuration menu (Audio Filter).