Specifications

44
level for best reception.
Push the ENT key to accept the data and return to a standard display. Alternatively, push the
ESC key to abort entry, or, push the down arrow key to move to the next item on the
configuration menu (RF-GAIN).
6-7 Configure RF-GAIN (Radio Frequency gain)
The RF gain setting switches in the attenuator or preamplifier to suite the band conditions
and antenna in use.
The default setting for RF-GAIN is 255 (maximum gain control value). The value can be
adjusted according to the receiving conditions.
To access the configuration menu, push the FUNC key and then push the 7 key.
Push the down arrow key to move the cursor to the “RF-GAIN” selection point.
Use the main tuning dial, the right arrow key or the left arrow key to vary the RF-Gain
level for best reception.
Push the ENT key to accept the data and return to a standard display. Alternatively, push the
ESC key to abort entry, or, push the down arrow key to move to the next item on the
configuration menu (BPS).
6-8 Configure Remote BPS (Baud rate)
The Remote BPS Set menu is used to configure the RS-232C computer control settings as it
is important that they exactly match those of an associated computer connection or another
AR-ONE (connected via a male 9-pin to male 9-pin straight cable).
To access the configuration menu, push the FUNC key and then push the 7 key.
Push the down arrow key to move the cursor to the “BPS SET” selection point.
Use the main tuning dial, the right arrow key or the left arrow key to select the desired
RS-232C baud rate between 9600, 19200 or 38400 bps. The default setting is 19200 bps.