Specifications

35
MODE SET: Use the right arrow key or left arrow key or main tuning dial to select receive
mode, the FUNC key is used as a short cut to “AUTO”.
Note: If the receive mode is set to “AUTO”, the receive mode, channel step will be
taken from the pre-programmed auto band plan data, for this reason the
detailing will not be required and skipped. The next menu will be TEXT INPUT.
Push the down arrow key.
STEP: Assuming that a receive mode other than “AUTO” was selected, you will be
presented with the “STEP SET” menu. Use the main tuning dial or the right arrow key or left
arrow key to select the required tuning step from the following:
0.001 (1 Hz), 0.010 (10 Hz), 0.500 (500 Hz), 1.000 kHz, 2.000 kHz, 5.000 kHz, 5.25 kHz,
9.000 kHz, 10.000 kHz, 12.5 kHz, 25.000 kHz, 50.000 kHz, 100.000 kHz.
Alternatively, a step size may be entered in kHz format via the keypad in multiples of 1Hz in
the range of 1Hz ~ 100.000 kHz (do not push enter).
Push the down arrow key to access the TEXT INPUT menu.
TXT (TEXT): The cursor will be positioned in the bottom of the LCD. If an unwanted text
comment exists, push the S SET key to delete the character highlighted. To delete the entire
comment, place the cursor on the first character and push the FUNC key. Add new text as
required.