Specifications

32
5-2-2 Forcing the search to resume
If the AR-ONE stops on an unwanted busy frequency, rotate the main tuning dial knob or
use the up arrow key or down arrow key to force the search process to resume from the
current frequency displayed.
5-2-3 Stopping the search
While the search process is in progress (not stopped), push the VFO key (displaying the
data on screen before search was started).
5-3 Selection of search bank
There are 40 search banks. While searching, use the right arrow key or left arrow key to step
through search banks which contain data. If no data is programmed in the nominated search
bank, the next bank containing valid data will be used.
5-4 Programming a search bank
Each of the 40 search banks may be programmed with different frequency limits, receive
modes, etc.
Push the FUNC key, and then push the 6 key to access the “SRCH PROG” menu.