Specifications

31
 LO (lower) start frequency
 HI (upper) stop frequency
 Receive mode (or set to AUTO MODE)
 Step (if auto is not selected)
 Text comment
The program search banks are identified by numbers (01 ~ 40). To help with identification,
each bank may be labeled with an alphanumeric text comment.
5-2 Staring program search
Presuming that data is already stored into a search bank …
Push the SRCH key to start the program search process.
The LCD icon “SRCH” will be displayed and as long as the squelch is closed, the search
process will start from the lower frequency limit and will progress toward the upper
frequency limit. When the program limit is reached, the search loops around and starts the
process again.
Note: If no search banks have been programmed, the search will not operate.
5-2-1 Reversing the direction of search
To reverse the direction of search, use the main tuning dial or the up/down arrow keys. This
is useful to enable you to search back over an interesting point of the search process.