Specifications

An appropriate IF filter is automatically selected when auto mode is engaged. However any

combination of IF filter and receive mode is possible in manual mode. When you have

manually selected an IF filter bandwidth, auto mode will be disengaged, but the receive

mode, step size, etc will be retained until they are changed manually.

2-7-1 Manually selecting IF bandwidth

Push the FUNC key, and then push the MODE key.

Select a new bandwidth from the list of 300, 200, 100, 30, 16, 8.5, 6, 3, and 0.5 KHz by

rotating the main tuning dial or arrow key. To accept the new bandwidth selection, push the

ENT key.

2-8 AGC (Automatic Gain Control)

To change the AGC parameter setting, push the FUNC key and then push the ATT key.

Select a new AGC parameter from the list of MANU, FAST, MID, SLOW by rotating the

main tuning dial or arrow key. To accept the new AGC parameter, push the ENT key.