Specifications

11
ATT
RF Attenuator. Move the cursor to select the desired parameter. The AUTO selection will
work best for most of cases.
AGC
Automatic Gain Control. Move the cursor to select the desired AGC time constant. Usually,
FAST is used to receive CW, MEDIUM for AM and FM, and SLOW for SSB. When MANU is
selected, any desired parameter (between 0 – 255) can be selected for manual gain control.
dBm
Toggles the incoming signal strength unit between dBm, dBuV, or ordinary S units.
0 ~ 9 , .
Numeric keys.
S. SET
Push the [FUNC] key, and then push this key to select the desired memory channels to scan
in the SELECT SCAN mode.
S.SCAN
Push the [FUNC] key, and then push this key to initiate SELECT SCAN.
DEL
Push the [FUNC] key, and then push this key to delete memory channels, a search bank or
pass frequency.
PRIO
Push the [FUNC] key, and then push this key to initiate PRIORITY CHANNEL RECEIVE.
RF AMP
Push the [FUNC] key, and then push this key to activate/deactivate the RF amplifier
(ON/OFF/AUTO).
S PROG
Push the [FUNC] key, and then push this key to set the search bank.
CONF
Push the [FUNC] key, and then push this key to access CONFIGURATION menu to alter
beep level setting, backlight function, etc.
SQL
Push the [FUNC] key, and then push this key to select either the noise squelch mode or
level squelch mode.
PASS
Push the [FUNC] key, and then push this key to set pass frequencies in search mode.