Specifications

9
Rear Panel
12. Antenna connector (N type)
13. Standard signal (10 MHz) input connector
14. IF output connector
15. Main power switch
16. DC power input connector (design may vary depending on AR-ONE
generation)
17. Remote control connector (RS-232C) -- 1
18. Remote control connector (RS-232C) – 2
19. External audio output connector (when used, the internal speaker is disabled)
20. Audio output connector (speaker output without disabling the internal speaker)
21. Signal output connector (0 – 4.5 V DC maximum)
RS-232C connection requirements:
The REMOTE RS-232C connectors (17 & 18 above) are designed for connection directly to
a RS-232C serial port of a PC. By daisy chaining the units, control of up to 99 AR-ONE
receivers is possible from one PC. No interface is required, just a standard RS-232C straight
cable. Connections for a PC are as follows:
AR-ONE DB-9 RS-232C cable DB-25 RS-232C cable
Pin # 2 Pin # 2 Pin # 3
Pin # 3 Pin # 3 Pin # 2
Pin # 5 Pin # 5 (Ground) Pin # 7 (Ground)
Pin # 7 Pin # 7 Pin # 4
Pin # 8 Pin # 8 Pin # 5