Specifications

13
Numeric figure four during frequency input. Selection of memory/scan bank “D” or “d” and search bank
“D” or “d” or “N” or “n”.
toggles the priority facility on/off (assuming that one has already
been assigned using the priority menu). The LCD legend “PRI” confirms when priority has been
selected.
to access the priority menu where the data from a memory
channel may be assigned for priority use. The interval sampling time may also be specified.
Numeric figure five during frequency input. Selection of memory/scan bank “E” or “e” and search bank
“E” or “e” or “O” or “o”.
to initiate select scan (assuming that more than one memory
channel has already been tagged for select scan). The LCD legend “SEL” indicates when select scan is
active. or or to exit select scan.
Numeric figure six during frequency input. Selection of memory/scan bank “F” or “f” and search bank
“F” or “f” or “P” or “p”.
to access the program search menu where upper / lower
frequency limits etc for search mode may be entered.
Numeric figure seven during frequency input. Selection of memory/scan bank “G” or “g” and search
bank “G” or “g” or “Q” or “q”.
to access the configuration menu where the beep, lamp, LCD
contrast, RS232 etc. may be configured.
Numeric figure eight during frequency input. Selection of memory/scan bank “H” or “h” and search bank
“H” or “h” or “R” or “r”.
to access the edit menu when memory channels and search
banks may be amended and copy protection configured.
Section 1-5-2