Specifications

10
1-5-2 Summary of keys
The main keypad is located on the front cabinet of the AR8200 with other keys located on the left
hand side. When powered from internal batteries with the lamp configured to AUTO, the lamp will
automatically illuminate when keys are pressed and will stay illuminated for five seconds after the last
key press.
An optional CC8200 RS232 lead is required for computer control, the optional CO8200 lead is required
for copying data between two AR8200 radios, various optional SLOT CARDS are available which further
extend the AR8200 facilities (and menus).
PUSH this key to place the AR8200 into SEARCH mode, the LCD “SRCH” legend confirms operation.
to access the bank link menu where up to ten different selections of
linked search banks may be grouped, this is useful where a large frequency band has been split up into
smaller more manageable sizes for close scrutiny.
Additional search related parameters may be set up to optimise each search group independently using
this menu:-
DELAY OFF / HOLD / 0.1s to 9.9s (default = OFF)
LEVEL OFF / 1 to 255 (default = OFF)
VOICE OFF / 1 to 255 (default = OFF)
FREE OFF / 1s to 60s (default = OFF)
AUTOSTORE ON / OFF (default = OFF)
DELETE J (deletes the current data from bank J)
PUSH this key to place the AR8200 into MEMORY READ mode, the LCD legend “M.RD” confirms
selection. again to initiate SCAN, the LCD legend “SCAN” confirms selection
to access the bank link menu where up to ten groups of memories may
be selected to be scanned in succession, effectively forming one large scan bank. Additional scan
related parameters may be set up to optimise each scan group independently using this menu:-
DELAY OFF / HOLD / 0.1s to 9.9s (default = OFF)
LEVEL OFF / 1 to 255 (default = OFF)
VOICE OFF / 1 to 255 (default = OFF)
FREE OFF / 1s to 60s (default = OFF)
MODE SCAN ALL / WFM / NFM / SFM / WAM / AM
/ NAM / USB / LSB / CW (default = ALL)
to set the ratio of bank size between memory channels sharing a
common letter in upper and lower case.
Section 1-5-2