Specifications

79
• While scanning
Press the [SCAN] key, and then press the [MHz] key. The active channel will be transferred to
VFO-C, and the AR5001D will switch to VFO-C automatically.
11-3-1-3 BETWEEN VFOs
This function enables you to copy the current VFO frequency to another VFO.
To activate the VFO copy function, perform the following steps:
1. In VFO mode, press and hold the [MHz] key for two seconds.
2. Press the [.] key.
3. Rotate the sub dial to select the desired VFO to be copied.
4. Press the [MHz] key to accept the entry and return to a standard display.
Alternatively, press the [CLR] key to abort entry.
11-3-2 VFO SEARCH DELAY
The VFO search delay parameter affects the time the AR5001D will remain on an active frequency in
VFO search mode once the received signal has disappeared and the squelch closed. This is particularly
useful for customizing how long the receiver will wait for a reply before continuing to search.
The parameter ranges are off, hold and 0.1 to 9.9 seconds in 0.1 second step.
To set the VFO search delay parameter, perform the following steps:
1. Press the [FUNC] key, and then press the [VFO] key.
2. Rotate the sub dial to select the delay time. To set it “OFF”, press the [PASS] key.
3. To confirm entry, press the [MHz] key. To set other parameters, press the [DOWN] key.
11-3-3 VFO VOICE SQUELCH
When the VFO voice squelch function is activated, the audio will be muted on unmodulated voice
signals.