Specifications

68
4. When the configuration menu is displayed, press the [UP] key five times to select “READ FROM SD” in
reverse contrast.
5. Press the [MHz] key.
6. A sub screen will appear with a list of memory data file displayed.
7. To change the memory page, rotate the sub dial to select.
8. Using the [UP] key or [DOWN] key, select the desired file name.
9. Press the [MHz] key. Alternatively, press the [CLR] key to abort entry.
10. After reading the file data, the receiver will return to a standard display.
9-11 CONFIGURE SD FORMAT
To format an SD card, perform the following steps:
1. Insert a new SD memory card with a printed label upward facing the slot on the front panel until you
can hear a click.
2. Wait until “SD” appears on the top of the LCD.
3. Press the [FUNC] key, and then press the [kHz] key.
4. When the configuration menu is displayed, press the [UP] key four times to select “SD FORMAT”
in reverse contrast.
5. Press the [MHz] key.
6. If you wish to proceed to format, press the [ENT] key.
To cancel formatting, press the [CLR] key.