Specifications

47
11-12 Password
IP PAS IP PASccccccccccccccc
ccccccccccccccc: Password
(6 ~ 15 characters including ! # $ % & - = ^ : @ + * ? _)
(default: password)
(Note: Password MUST be set.)
To read: IP PAS<CR>
Response: IP PASccccccccccccccc
12. SD (SDHC) card commands
SD sub command parameter
12-1 Property of SD card
SD INF SD INF (Direct command)
Displays the card’s total size and its usage.
Note: After deleting files, remove the SD card from the slot once. Then
re-insert the card to display the free space.
12-2 Display file directory
SD DIR SD DIR (Direct command)
Displays the card’s file directory, recorded time and file size.
To read: SD DIR<CR>
12-3 Delete data file
SD DEL SD DEL xxxxxxxx xxxxxxxx:file name
12-4 Format card
SD FMT Format the card
12-5 Write data to SD card
SD MMW
(for debug
only)
SD MMW (file name) (Direct command)
Saves the receivers current state & settings (internal memory content only)
(Note: File name: up to 8 characters. The file extension will be automatically
set to .mmd).
12-6 Read data from SD card
SD MMR
(for debug
only)
SD MMR (file name) (Direct command)
Loads a receivers’s current state & settings (internal memory only)